Table of Contents
Advertisement
C H A P T E R
3
O S D
Additionally, it is possible to change the position of the area to be covered. Please refer to the
following example for detailed steps on moving AREA1 to center.
1. The original position of AREA1 was TOP: 10, DOWN: 25, LEFT: 20 and RIGHT: 40.
AREA1
2. Increase DOWN scale value by 20. AREA1 position after change is: TOP: 10, DOWN: 45, LEFT:
20 and RIGHT: 40.
AREA1
3. Increase TOP scale value by 20. AREA1 position after change is: TOP: 30, DOWN: 45, LEFT: 20
and RIGHT: 40.
AREA1
M E N U
A N D
C O N F I G U R A T I O N
43
Advertisement
Table of Contents
