Enterasys RoamAbout RBT-4102 Installation Manual page 12

Enterasys wireless access point installation guide
Hide thumbs Also See for RoamAbout RBT-4102:
Table of Contents

Advertisement

Compliances
Operation Using 5 GHz Channels in the European Community
The user/installer must use the provided configuration utility to check the current channel of
operation and make necessary configuration changes to ensure operation occurs in
conformance with European National spectrum usage laws as described below and elsewhere
in this document.
Allowed 5GHz Channels in Each European Community Country
Allowed Frequency Bands
5.15 - 5.25* GHz
* Outdoor operation is not allowed using 5.15-5.25 GHz bands (Channels 36 - 48).
Countries of Operation & Conditions of Use in the Asia, Pacific, and Middle
East Communities
This device is intended to be operated in all countries listed below of the Asia, Pacific, and
Middle East Community. Requirements for indoor vs. outdoor operation, license requirements
and allowed channels of operation apply in some countries as described below:
Note: The user must use the configuration utility provided with this product to ensure the
channels of operation are in conformance with the spectrum usage rules for countries
as described below.
• This device requires that the user or installer properly enter the current country of operation
in the command line interface as described in the user guide, before operating this device.
• This device will automatically limit the allowable channels determined by the current country
of operation. Incorrectly entering the country of operation may result in illegal operation and
may cause harmful interference to other system. The user is obligated to ensure the device
is operating according to the channel limitations, indoor/outdoor restrictions and license
requirements for each country as described in this document.
• This device employs a radar detection feature required for operation in the 5 GHz band. The
presence of nearby radar operation may result in temporary interruption of operation of this
device.
• The 5 GHz Turbo Mode feature is not allowed for operation in any of the countries. The
current setting for this feature is found in the 5 GHz 802.11a Radio Settings Window as
described in the user guide.
• The 5 GHz radio's Auto Channel Select setting described in the user guide must always
x
Allowed Channel Numbers
36, 40, 44, 48
Countries
Austria, Belgium,
Cyprus, Czech
Republic, Denmark,
Estonia, Finland,
France, Germany,
Greece, Hungary,
Iceland, Ireland, Italy,
Latvia, Liechtenstein,
Lithuania, Luxembourg,
Malta, Netherlands,
Norway, Poland,
Portugal, Slovakia,
Slovenia, Spain,
Sweden, Switzerland,
U.K.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents