Enterasys ANG-1000 User Manual page 48

Refer to the tables below for command usage, switches, arguments, and
definitions.
Usage
ipportfw -A -[t | u] l.l.l.l/lport -R a.a.a.a/rport
ipportfw -D -[t | u] l.l.l.l/lport
Switch
-t
-u
-A
-C
-D
-R
-L
Follow the steps below to configure IP port forwarding.
36
l.l.l.l is the address of the VPN interface receiving packets to be forwarded
a.a.a.a is the server address on the LAN
lport is the port being redirected
rport is the port being redirected to
<arg>
VPN address/port
VPN address/port
None
None
None
IP address/port
None
1 Login to Web Config.
2 Click on the Config File Editor menu option.
3 Click on the ipfwrules Configuration File.
4 In the Configuration File Edit window, scroll to the end of the file.
5 Under **Expert-Config**, type the following rules:
– ipportfw -C
– ipportfw -A <-t or -u> <VPN address/local port> -R <local server
IP address/remote port>
6 Click Update and Reboot Now when prompted to save the change.
Configuring the ANG-1000 with Aurorean Web Config
Definition
Forward TCP traffic
Forward UDP traffic
Add the IP port forwarding table entry
Clear the IP port forwarding table
Delete the IP port forwarding table entry
Define the server IP address
List the IP port forwarding table
Aurorean Network Gateway-1000 User's Guide
Chapter 3
add entry
delete entry