Enterasys ANG-1000 User Manual page 24

12
– To configure your PC to include the domain of the corporate
network you will connect to.
To do so on your Windows 95/98/ME/2000 desktop: click
Start, select Settings and double-click Control Panel (Win
2000: Network and Dial-up Connections). Double-click the
Network icon (Win 2000: right click on Local Area
Connection and click Properties), click the Protocols tab,
select TCP/IP Protocol, click Properties, select the DNS tab
and add the Domain Suffix in the field provided. Click OK
twice to close the open windows.
H On your computer, release and renew the IP address for all adaptors
bound to TCP/IP. Refer to the Caution on page 24 for instructions.
H If you have cable service, learn the MAC address of your computer as
described on page 32.
H If your computer was supplied a static IP address and Gateway by
your service provider, you must now accept the address from a DHCP
server and remove the gateway for the ANG-1000 to find and connect
with the PC.
To do so, click Start, select Settings and double-click on Control Panel.
Double-click the Network icon, select the Protocols tab and TCP/IP
Protocol, click on Properties and the IP Address tab. Select the Obtain
an IP address from a DHCP server radio button. Click Advanced,
select the Gateway, click Remove and OK. Click OK twice more to
close the open windows.
H Web Config supports the use of Internet Explorer 5 or Netscape 4
Web browsers.
Configuring the ANG-1000 with Aurorean Web Config
Aurorean Network Gateway-1000 User's Guide
Chapter 3