Table of Contents
Advertisement
4.
LAN controller setting (3-pin LAN_SW1, LAN_SW2)
These jumpers allow you to enable or disable the onboard Intel
82574LGigabit LAN controllers. Set to pins 1-2 to activate the Gigabit LAN
feature.
5.
IDE control setting (3-pin IDE_SW1)
This jumper allows you to enable or disable the IDE connector. Set to pins 1–
2 to enable the IDE connector or pins 2–3 disable the IDE connector.
4-6
®
Chapter 4: Motherboard information
Intel
Advertisement
Table of Contents
