Table of Contents
Advertisement
When asked if you will load additional RAID controller drivers, select No, then
5.
press <Enter>.
More Driver Disks?
Do you wish to load any more
driver disks?
Yes
6.
Follow the onscreen instructions to finish the OS installation.
7.
If you are installing RHEL AS5, when the installation is completed, DO NOT
click Reboot. Press <Ctrl> + <Alt> + <F2> to switch to the command-line
interface from graphic user interface and execute replace_ahci.sh
following the instructions of step 8.
8.
Type the following commands when using a Legacy floppy.
mkdir /mnt/driver
mount /dev/fd0 /mnt/driver
cd /mnt/driver
sh replace_ahci.sh
reboot
Type the following commands when using a USB floppy.
cat /proc/partitions
Write down the Major and Minor number before sdb for later use.
mknod /dev/sdb b [major number] [minor number]
mkdir /mnt/driver
mount /dev/sdb /mnt/driver
cd /mnt/driver
sh replace_ahci.sh
reboot
ASUS TS700-E6/RS8
No
7-9
Advertisement
Table of Contents
