Basic Operation; Turning On The Abx-100; Selecting The Input Source; Adjusting The Volume - Onkyo ABX-100 Instruction Manual

Dock music system
Hide thumbs Also See for ABX-100:
Table of Contents

Advertisement

Basic Operation

MENU
ENTER
F/H
Downlight (below the speakers)

Turning On the ABX-100

To turn on the ABX-100, press the [ ON/STANDBY]
button on the ABX-100 or remote controller.
Press the [ ON/STANDBY] button again to set the
ABX-100 to Standby.
If an iPod/iPhone is connected to the ABX-100, the iPod/
iPhone will be charged.

Selecting the Input Source

You can select iPod or LINE, which can be an external
component.
To select the input source, use the remote controller's
INPUT []/[] buttons. On the ABX-100, press the
[INPUT] button repeatedly.

Adjusting the Volume

Press the VOL Up [] button to increase the volume or
the VOL Down [] button to decrease it.
You can also use the remote controller's VOLUME []/
[] buttons.

Muting the ABX-100

(remote controller only)
To mute the ABX-100, press the remote controller's
[MUTING] button.
"Muting" appears on the display for a few seconds.
To unmute the ABX-100, press the [MUTING] button again.
Tips:
While the ABX-100 is muted:
• Press the VOL []/[] buttons on the ABX-100 or
pressing the VOLUME []/[] buttons on the remote
controller will unmute the ABX-100.
• If you turn the ABX-100 off, the next time you turn it
on, the ABX-100 will be unmuted.
8
En-
INPUT
VOL H/F
M ON/STANDBY
M
DIMMER
INPUT
C/U
MENU
ENTER
MUTING

Changing the Downlight Brightness

(remote controller only)
You can adjust the brightness of the downlight.
Press the remote controller's [DIMMER] button
repeatedly to select normal, dim or off.
Downlight

Adjusting the Bass and Treble

1
Press the [TONE] button to make the
display indicate "Tone Control."
2
Use the []/[] buttons to adjust the value.
You can adjust the value in the range of –3 to +3.
3
Press the [ENTER] button.
The value of the Treble setting will blink.
4
Use the []/[] buttons to adjust the value.
5
Press the [ENTER] button.
The original display will reappear.
Note:
• If you press no buttons for eight seconds, the previous
display will appear automatically.
F/H
TONE
S.BASS
VOLUME
F/H
ABX-100

Advertisement

Table of Contents
loading

Table of Contents