Playing Your iPod/iPhone ..En- Setting the Clock ..... En- Thank you for purchasing an Onkyo Dock Music System. Please read this manual thoroughly before making any connections and plugging it in. Following the instructions in this manual will enable you to obtain Using the Timers .....
WARNING: WARNING AVIS RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE TO REDUCE THE RISK OF FIRE OR ELECTRIC DO NOT OPEN NE PAS OUVRIR SHOCK, DO NOT EXPOSE THIS APPARATUS The lightning flash with arrowhead symbol, within an TO RAIN OR MOISTURE. equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
LIEGNITZERSTRASSE 6, are wet or damp. If water or any other liquid gets 82194 GROEBENZELL, inside this unit, have it checked by your Onkyo GERMANY dealer. declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the 6.
Using the Remote Controller ......5 • Line input for external audio source Replacing the Battery ........5 • Downlight with adjustable dimmer Getting to Know the ABX-100 ......6 iPod/iPhone Connections ............7 • Made for iPod touch (1st, 2nd, 3rd and 4th Installing the iPod Universal Dock Adapter..
• The AC adapter supplied with the ABX-100 is designed exclusively for use with the ABX-100. Do not use it with any another device. Likewise, do not use any other AC adapter with the ABX-100. Doing so may damage the ABX-100. Using the Remote...
Getting to Know the ABX-100 Top Panel Remote Controller n o p Rear Panel Bottom The page numbers in parentheses show where you can find the main explanation for each item. Top/Rear Panel [] button Slide cover (7) TONE button (8) iPod/iPhone Dock (7) S.BASS button (9)
Connecting a Portable Audio Device LINE IN Connect the ABX-100’s LINE IN jack on the rear panel to the portable audio device’s output jack. Depending on the type of output jack on the portable AC adapter audio device, you may need to purchase a suitable cable.
• Press the VOL []/[] buttons on the ABX-100 or pressing the VOLUME []/[] buttons on the remote controller will unmute the ABX-100. • If you turn the ABX-100 off, the next time you turn it on, the ABX-100 will be unmuted.
If you Notes: insert it into the ABX-100 dock in this state, you’ll • To prevent damage to the dock connector, do not twist need to wait a few moments before your iPod/iPhone or force your iPod/iPhone into the dock, and be careful is ready for use.
With random playback, the songs on the iPod/iPhone are • The volume level is adjusted by using the VOL []/ played in random order. [] buttons on the ABX-100 or its remote controller. Adjusting the volume on your iPod/iPhone has no Press the [SHUFFLE] button.
F, H Note: Press the [ENTER] button. • Clock settings can be made only while the ABX-100 A pixel in the lower right will blink to indicate that is in standby mode. If the ABX-100 is powered-on, the clock has started.
Timer1 programming a timer, the procedure will be cancelled. 6:30 • Timer settings can be made only while the ABX-100 7:00 is in standby mode. If the ABX-100 is powered-on, press the [] button to put the unit in standby mode.
Using the Sleep Timer Use the []/[] buttons to specify the ABX-100’s volume level, and then press the With the sleep timer, you can set the ABX-100 so that it [ENTER] button. automatically turns off after a specified period. The timer symbol and number will appear in the upper right of the display;...
ABX-100, look for a solution in this section. There’s no sound. If you can’t resolve the issue yourself, try resetting • Make sure the ABX-100’s volume is not set too low the ABX-100 before contacting your Onkyo dealer. (see page 7).