Symbols - Craftsman 315.212050 Operator's Manual

Someofthefollowing symbols maybeusedonthistool.Please studythemandlearn theirmeaning. Proper
interpretation ofthesesymbols willallowyouto operate thetoolbetterandsafer.
SYM BOL NAM E DESIG NATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency ( cycles persecond)
W Watt Power
min Minutes Time
"%, Alternating Current Type of current
Direct Current Type or a characteristic of current
n o No Load Speed Rotational speed, at no load
[] Class II Construction Double-insulated construction
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
Wet Conditions Alert Do not expose to rain or use in damp locations.
Read The Operator's Manual To reduce the risk of injury, user must read and understand operator's manual before using this product.
O Always wear safety goggles or safety glasses with side
Eye Protection
shields and a full face shield when operating this product.
_, Alert Precautions that involve
Safety your safety.
t_ Failure to keep your hands away from the blade will result in
No Hands Symbol serious personal injury.
No Hands Failure to keep your hands away from the blade will result in
Symbol
serious personal injury.
No Hands Symbol Failure to keep your hands away from the blade will result in
serious personal injury.
No Hands Symbol Failure to keep your hands away from the blade will result in
serious personal injury.
Hot Surface
®
To reduce the risk of injury or damage, avoid contact with
any hot surface.