Advertisement
INSTALLING AUXILIARY HANDLE
See Figure 4.
An auxiliaryhandle is packed with your drillfor ease
of operation and to help prevent loss of control.To
install,start the screw threads into the threaded hole
in the gear housingand tighten securely.
Note: For convenience, the screw has been trapped
inside the auxiliary handle.
To prevent thread damage and possibleloss of
control,auxiliary handle should be checked pedodi-
canyfor tightness. Do not operate ddll with auxiliary
handle loose.
CHUCK KEY
See Figure 5.
A chuck key has been provided for use when
installingor removing bits.
CHUCK KEY STORAGE
See Figure 5.
When not in use, the chuck key can be placed in the
storage area located on the bottomportionof the
handle of your drill as shown in figure 1.
TO
CHUCK KEY
STORE
STORAGE AREA
AUXlUARY
GEAR
HOU_NG
TO
REMOVE
Fig. 5
Fig. 4
8
Advertisement
