Installing And Removing The Battery - Canon EOS 550D Instruction Manual

Installing and Removing the Battery
Installing the Battery
Load a fully charged Battery Pack LPoE8 into the camera,
Open the battery compartment
cover,
®_ Slide the lever as shown by the arrow'
and open the cover.
2
insert the battery.
®_ Insert the end with the battery
contacts,
_ insert the battery until it locks in
place.
_ Close the cover,
_ Press the cover until it snaps shut.
Removing the Battery
Open the cover and remove the
battery.
_ Press the battery release lever as
shown by the arrow and remove the
battery.
® To prevent short circuiting, be sure to
attach the protective cover to the
battery.
After opening the battery compartment c0vei be ca;eful not tOSwing it back
!
further. Otherwise, the hinge might break_
26