Configure The Schedule Settings Of The Ftp Periodic Image Transmission [Ftp Img. Trans.]; Trans.]; How To Set The Schedules - Panasonic WV-SF438 Operating Instructions Manual

17 Configuring the network settings [Network]
17.7 Configure the schedule settings of the FTP
periodic image transmission [FTP img. trans.]
Click the [FTP img. trans.] tab on the "Network" page. (®page 51, page 53)
The schedule settings of the FTP periodic image transmission can be configured in this section. Refer to
page 185 for further information about the settings relating to the FTP periodic image transmission.
Note
•
When "VGA Quad streams [4:3]" is selected for "Image capture mode", the schedule settings of the
FTP periodic image transmission are unavailable.

17.7.1 How to set the schedules

1.
Check the check box of the desired day of the week of "FTP image transmission schedule".
→
The selected day of the week will be validated for the schedule.
2.
To designate time, select the desired "hour" and "minute" from the pull-down menu.
When not designating time, check the checkbox of "24h".
188 Operating Instructions