Uniden UDR444 Owner's Manual page 9

2. The monitor displays the Uniden title screen and then displays the live view.
Power Up the Camera
1. Connect one end of an AC adapter to the camera's power pigtail and plug the other
end into a 120 volt AC (standard indoor) power outlet.
2. Cameras provided in the kit are already paired to the monitor. Once they are powered
up, the monitor displays images from that camera.
3. Adjust the camera viewing position if needed.
If...
there is no camera
picture
the picture quality is poor
a white image appears at
night
Try this...
Verify that the power supply adapter for the
camera(s) is plugged in.
Clean the camera lens.
The camera's infra-red LED shines invisible light
that reflects off surfaces such as glass, causing
white light. Place the camera on the other side of
windows with the lens flush against the surface to
improve the night vision, or place the camera in a
well-lit area.
9