Sanyo PLC-XC50 - 2600 Lumens Manual page 26

PLC-XC50/55 Expand Serial Command Functional Specifications
Input is
Video
Select System of currently selected Input
When Input specified by %1 is inappropriate for selected Input, the projector
returns "101"[CR] and the command is not executed
This command is available in normal Power ON status.
Details Note1) "NTSC" / "NTSC4.43" / "PAL" / "SECAM" / "PAL-M" / "PAL-N" is available
Note2) "1080I" / "1035I" / "720P" / "575P" / "480P" / "575I" / "480I" is available only
Note3) D-XGA1/.../D-480P is available only when Input is applicable.
Acceptable
Response
Unacceptable
"AUTO" -------------------------- Select System "Auto"
"NTSC" -------------------------- Select NTSC
"NTSC443" --------------------- Select NTSC4.43
"PAL" ----------------------------- Select PAL
"SECAM" ----------------------- Select SECAM
"PAL-M" ------------------------- Select PAL-M
"PAL-N" ------------------------- Select PAL-N
"1080I" -------------------------- Select 1080i
"1035I" -------------------------- Select 1035i
"720P" --------------------------- Select 720p
"575P" --------------------------- Select 575p
"480P" --------------------------- Select 480p
"575I" ---------------------------- Select 575i
"480I" ---------------------------- Select 480i
only when Input is VIDEO / S-VIDEO
when Input is Y / Pb/Cb / Pr/Cr
"000"[CR]
"Error Code"[CR]
26/67