Examples Of Connection - Sanyo PLC-WM4500 Owner's Manual
Network set-up and operation
Hide thumbs
Also See for PLC-WM4500:
- Owner's manual (91 pages) ,
- User manual (1 page) ,
- Command list (1 page)
Table of Contents
Advertisement
Chapter 5 Appendix
Examples of connection
Peer-To-Peer connection
Connecting the projector (PJ01) to the control computer (PC05) directly.
Computer Name: PC05
IP Address
: 192.168.0.5
Subnet Mask
: 255.255.255.0
Default Gateway :
DNS
:
Connecting the projector (PJ01) to the control computer (PC05) via the hub.
To another network
Computer Name: PC05
IP Address
: 192.168.0.5
Subnet Mask
: 255.255.255.0
Default Gateway :
DNS
:
✐ When the projector is connected to the computer directly without hub, the UTP cross cable
should be used.
* UTP cross cable
Hub
Computer Name: PC10
IP Address
: 192.168.0.10
Subnet Mask
: 255.255.255.0
Default Gateway :
DNS
:
Projector Name: PJ01
IP Address
: 192.168.0.2
Subnet Mask
: 255.255.255.0
Default Gateway : 0.0.0.0
DNS
: 0.0.0.0
Projector Name: PJ01
IP Address
: 192.168.0.2
Subnet Mask
: 255.255.255.0
Default Gateway : 0.0.0.0
DNS
: 0.0.0.0
Advertisement
Table of Contents
