Sanyo PLC-WM4500 Owner's Manual page 27

3
Setting SMTP authentication
Set the SMTP authentication concerned
and click Set button. Please contact your
network administrator in details.
4
Setting POP server
When "POP before SMTP" is selected at
"Auth" of "SMTP Authentication setting",
enter "POP server*
and click Set button.
*2 The POP server is a server for receiving e-mail.
Please contact your network administrator to have this POP server address.
If the authentication is not completed
when sending alert e-mail, the error mes-
sage will be displayed. Please check the
respective settings.
5
Option selection for sending alert mail
Click Option sub menu tab. Check the con-
dition items under which alert mail will be
sent and click Set button.
Please refer to item "Examples :Type and
contents of alert mail" described on the next
page.
✐ "When PJ lamp is off" signifies the lamp goes out without user operation. "When PJ is turned into
Standby in proper user operation" signifies that the projector is turned on by using the web browser
and then it is turned into standby with ON/STANDBY button on the side control or the remote control.
Up to 99,999 hours can be set for use time.
✐
" and "POP server port"
2
E-mail setting
Error information
Option