System - Sanyo PLC-WM4500 Owner's Manual

System

This function is to select the system of signal
input to the projector. The available system
mode are listed on the pull-down menu but-
ton according to the input signal. Select a
system and then click Set button.
Available selection at the RGB(PC analog)
input
Item Description
XGA1 ........................ It automatically switches to the proper computer sys-
tem of the input signal.
* The computer system modes (VGA, SVGA, XGA. SXGA,
UXGA, WXGA...) which meet the input signal are listed.
Available selection at the HDMI input
Item Description
D-XGA ...................... It automatically switches to the proper computer sys-
tem of the input signal.
* The computer system modes (D-VGA, D-SVGA, D-XGA.
D-SXGA1...) which meet the input signal are listed.
D-480p .................... It automatically switches to the proper scanning system
of the input signal.
* The selectable scanning systems are D-480p, D-575p,
D-720p, D-1035i, D-1080i and D-1080p.
Available selection at the Video/S-video/Scart input
Item Description
AUTO ........................ It automatically switches to the proper color system of
the input signal.
* The selectable color systems are PAL, SECAM, NTSC,
NTSC4.43, PAL-M and PAL-N.
* AUTO is fixed at the Scart input.
Available selection at the Component input
Item Description
AUTO ........................ It automatically switches to the proper scanning system
of the input signal.
* The selectable scanning systems are 480i, 575i, 480p,
575p, 720p, 1035i, 1080i and 1080p.
✐ If the mode (Mode1 to Mode10) which is stored in the item "PC Adjustment" (+ p.38) is available,
they are also listed together with the above mode.
Control
5