Troubleshooting - Bosch Nexxt Series Instruction Manual

Troubleshooting
TO AVOID RISK OF
ELECTRICAL SHOCK!
Repairs or replacement of parts
shall be carried out by qualified
technicians or licensed
electricians only_
Before calling the customer service,
check whether you can rectify the fault
yourself by means of the following
table.
If a fault cannot be rectified or a repair
is required:
1. Set program selector to "Off".
2. Turn off the circuit breaker.
3. Pull the main plug out of the
socket.
4. Call customer service
(see page 26).
Problem
Dryerdoesnotstart.
"Start!Stop"indicatorlight doesnot
illuminate.
Programhasbeen interrupted.
A warningsignalis emittedand the
display shows"E:O!".
Degree of dryinghasnot beenreached
or the dryingtime is toolong.
Displaymay indicate"E:03".
Drumlight doesnotfunction.
Possiblecause
Mainplug not inserted at all or notinsertedcorrectly.
A fuse of powersupplyhastripped.
"Start/Stop"buttonnot pressed.
Noprogramselected.
Doornot closed.
Ambienttemperaturebelow41°F (5 °C.)
Lintfilter dirty.
Exhaust a ir duct is blockedor too long.
Faultin programsequence or malfunction.
The room/cabinet i s not adequately ventilated.
Moisturesensordirty.
Exhaust a ir duct is blockedor too long.
Lintfilter dirty.
Laundry was too wet.
Unsuitable programselected.
Maximum dryingtime was exceeded.
Motorlimit temperaturewas exceeded.
Degree of drynessnot correctlyset
Noprogramselected.
Lightbulb defective,light bulb burnedout.
Nopowersupply.
Lightbulb is loose.
Faultin programsequence or malfunction. "StaWStop" indicatorlight doesnot
illuminate."Wrinkleblock" indicator
lights.
Thedisplayshows"000".
Lintfilter LEDis blinkingafter lint filter Blinkingof lint filter LEDis not an indication of a Noaction required. Lightwill stop blinking.
hasbeencleaned problem. It is usedonlyas a reminder.
Remedialaction
Insertmainplug correctly.
Replace/switch o n fuse.
Press"Start/Stop"button.
Selectprogram.
Closedoor.
Increaseroomtemperature.
Cleanfilter as described on page22.
Switchoff/switchon again.
Cleanexhaustair duct.Reduce exhaustair duct to
maximumlengthas described on page14.
Switchoff/switchon again.
Switchoff dryer,leaveto cooldownfor 30 min,
switchon again.
Restartprogram.
Providean adequatesupplyof fresh air.
Switchoff/switchon again.
Cleanmoisturesensoras described on page24.
Switchoff/switchon again.
Cleanexhaustair extraction.Reduce exhaustair duct
to maximum lengthas described on page14.
Switchoff/switchon again.
Cleanfilter as described on page22.
Switchoff/switchon again.
Spinlaundryat higherspeedin the washing
machine.Switchoff/switchon again.
Selectprogramwith aid of the programselection
table(seepage 18).Switchoff/switchon again.
Cleanlintfilter (seepage 22).
Checkexhaustair extraction.
Spin laundryat a higherspeedin yourwasher.
Switchoff dryer,leaveto cooldownfor 30 min.
Switchon again.Start program.
800 Series,Changesettingsfor degree of dryness,
seepage20
Selectprogram.
Changelight bulb,seepage24.
Guarantee powersupply.
Tightenlight bulb. Remove and reinstallthe coveras
directedon page24.
Switchoff dryer,leaveto cooldownfor 30 min,
switchon again.
Restartprogram.
25