Accessories; Preparing To Transport The Dryer - Step By Step - Bosch Nexxt Series Instruction Manual

Accessories
The following optional accessories for
your dryer may be obtained from
customer service (see page 26) or from
your local dealer. Please follow the
installation instructions supplied by the
appropriate manufacturer.
Side exhaust kit
part no. WTZ 1265
Note:
See notes on maximum number of
elbows on page 14.
D A special tool is required for cutting
the exhaust hole in the dryer side
panel.
For further information please
contact your local dealer.
Bottom exhaust kit
part no. WTZ 1270
Note:
See notes on maximum number of
elbows on page 14.
Dryer rack
part no. WTZ1290
Use the dryer rack to dry washable
woolen textiles (e.g. sweaters) and
shoes.
Left hinge kit
part no. WTZ1260 for white
part no. WTZ1260S for solid silver tone
and for duo-tone color
The door is hinged on the right side at
the factory. The door catch can be
reversed if necessary. Please contact
your dealer or our customer service
team (see page 26)
Pedestal Mounting Kit
8 inch pedestal accessory number
WTZ 1295 for solid white color
WTZ 1295S for solid tone silver
WTZ 1295P for duo tone silver/white
15 inch pedestal accessory number
WTZ 1500 for solid white color
WTZ 1500S for solid tone silver
WTZ 1500P for duo tone silver/white
WTZ 15000 for duo tone
champagne/white
If mounting the dryer on the pedestal
follow the instructions supplied with the
pedestal before proceeding any further.
Preparing to transport the
dryer - step by step
D These procedures should only be
performed by a qualified person.
1. Rotate the program selector
to "OFF".
2. Disconnect the power supply (turn
circuit breaker off, unplug the
appliance)
3. Turn off the water faucet
connected to the water supply
hose. Disconnect the water
supply hose.
4. Disconnect the exhaust duct from
the exhaust air outlet on the dryer.
5. Collect any accessories and
package them for shipment with
the appliance.
6. Close the door and secure with
adhesive tape.
7. Screw the height-adjustable feet of
the dryer into the housing to
prevent them from being damaged
during transportation.
,
Reinstallation of the Dryer at the
New Location - refer to the
Installation Instructions in this
manual (see page 6).
15