Black & Decker FS1806CS Instruction Manual page 6

90505019 FS Circ Saws 7/14/06 8:50 _Pag e 6
,/h
.... ...................... direct current
[] .......................... Class II Construction
z_ ........................ safety alert symbol
tools are dangerous in the hands of untrained users.
• Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one laser / power toot, may create a risk of injury
when used on another laser / power toot.
• Repairs and servicing MUST be performed by a qualified repair facility. Repairs performed
by unqualified personnel could result in serious injury.
• Do not remove or deface warning labels. Removing labels increases the risk of exposure
to radiation.
• For indoor use only.
• This Product is intended for .us_ i0 a,,ter0iq,erature range,of 41 °F(5°C) - 104°F(40°C).
The Ib.belon your/aser may _nc_uae[ne TOHOWtng s ymDo_s.
V ................................ volts mW ...................... mitliwatts
nm .............................. wavelength in
nanometers
Ilia .............................. Class IliA Laser
The label on your toot may include the following symbols.
V .......................... volts A .......................... amperes
Hz ........................ hertz W ........................ watts
min ........................ minutes ,x, ...................... alternating
current
no ........................ no load speed
G ........................ earthing terminal
.../min .................. revolutions or
reciprocations
per m_nu[e
For your convenience and safety, the
following labels are on your laser.
(FS1806CSL, FS1807CS, FS2406CS
FS2407CSL)