Ariens 915163-Zoom XL 42 Owner's/Operator's Manual page 28

Engine runs
rough.
Unit does not
move with
engine running
when using
steering levers.
PTO or mower
blades do not
engage or shuts
off.
Engine
overheats.
Unit moves with
engine off and
parking brake
engaged.
Hour meter
continues when
engine not
running.
1. Choke engaged.
2. Air filter cartridge
plugged.
3. Faulty engine.
1. The transmission
bypass lever is
engaged.
2. Faulty hydrostatic
belt.
3. Faulty
transmission.
1. Operator presence
switch not
depressed.
2. Faulty operator
presence switch.
3. Electric clutch
connector is loose
or disconnected.
4,
5.
Faulty PTO belt.
Faulty PTO switch,
wires, connectors,
or clutch.
1. Engine oil level
low.
2. Cooling system
plugged.
3. Faulty engine.
1. The parking brake
needs adjustment.
2. Faulty parking
brake.
1. Ignition key is in
the run position
with engine turned
off.
1. Disengage choke.
2. Clean or replace air filter cartridge.
Refer to Engine Manual for detailed
instructions.
3. Contact your Ariens Dealer.
1. Disengage transmission bypass
lever (see on page 17).
2,
Replace hydrostatic belt (see
REPLACING HYDROSTATIC BELT
on page 25).
3. Contact your Ariens Dealer.
1. Depress operator presence switch
by sitting on seat.
2. Contact yourAriensDealer.
3,
4,
5.
Connect the electric clutch
connector. See REPLACING
HYDROSTATIC BELT on page 25
for the electric clutch connector
location.
Replace PTO belt (see REPLACING
PTO BELT on page 24).
Contact your Ariens Dealer.
1. Add engine oil. Refer to Engine
Manual for detailed instructions.
2. Clean cooling system. Refer to
Engine Manual for detailed
instructions.
3. Contact your Ariens Dealer.
1. Contact yourAriens Dealer.
2. Contact yourAriens Dealer.
1. Turn ignition key to the off position.
GB - 28