Freezer Features; Shelves - Amana ARB1917CW-PARB1917CW1 Owner's Manual

Freezer Features
Primary Features
Automatic Ice Maker (some models)
Using Ice Maker for the First Time _-_ ....
Confirm ice bin is in placa _ J
• and ice maker arm is down.
After freezer section reaches _
between 0° to 2°F (-18° to -17 ° C), ice maker fills
with water and begins operating.
Allow approximately 24 hours after installation to
receive first harvest of ice.
Discard ice created within first 12 hours of operatior
to verify system is flushed of impurities.
Operating Instructions
Confirm ice bin is in place and ice maker arm is
down.
After freezer section reaches 0 ° to 2°F (-18 ° to
-17 ° C), ice maker fills with water and begins
operating, You will have a complete harvest of
ice approximately every 3 hours,
Stop ice production by raising _ _--_
ice maker arm until click is heard.
Ice maker will remain in the off
position until arm is pushed down.
#
Shelves
Ice Service Rack
To install and remove rack: _-'°_
• To install, slide L-shaped _1.'_"_% %__
groove of shelf down over _NI _.[_.\%.. %__
back wall screw. Push rack back O" _._-_
until screw is stopped in L-shaped e$
groove (1), Slide front portion of
shelf over front wall screw (2).
• To remove, perform above steps in reverse order,
Fixed Freezer Shelf
To remove and install shelves:
Remove shelf by pulling
out to full extension. Tilt up
front of shelf and pull
straight out.
To install, insert shelf into
refrigerator liner rails and
push to back of compartment.
Slide-Out Freezer Shelf _
To remove and install shelves: l _,_ _
• Remove shelf by pulling out to full I_
extension. Tilt up front of shelf and _"_P_j_.
pull straight out. _._h__
• To install, insert shelf into "
refrigerator liner rails and push to_
back of compartment. IE:'_F" _"
!! CAUTION
I
avoidproperly d amage, observethefollowing:
Do not force ice maker arm down or up.
Do not place or store anything in ice storage bin.
Drawers
rwire Basket
]il__
TO remove and insta,t basket: ;I;_1 I_..,,,,,,,.,,,..,,,,,.._,,
• TO remove basket, pull
baske_l_!
/
out to full extension. Tilt up fro_
of basket and pull straight outl_---__:'_
To install, insert basket into refrigerator liner rails ant
push back into place
Pullout Drawer Baskets
(some models)
Door assembly of drawer removed from illustration for
visual clarity)
To remove and replace top basket:
Remove basket by pulling
basket oat to its full extension
and lift out,
Replace basket by
sliding into upper
molded railing.
To remove and re
basket:
Remove basket by lifting basket from rail guides.
Replace basket by placing into rail guides.
DANGER
To prevent accidental child entrapment or suffocation
risk,DO NOT remove the divider in the top freezer
_basket,
Door Storage
Door Shelf
Tilt-Out Bin
(somcmodels)
The tilt-out bin (A) provides A
convenient storage for frozen __
food items in freezer door and
tilts forward for easy access of
those items.
To remove and install door shelf:
See above instructionslisted for
Fixed Door Shelf.
12