Amana ARB1917CW-PARB1917CW1 Owner's Manual page 5

How to Reverse the Doors
Installing Your Refrigerator
Perform all steps listed in How to | Remove the Doors and Hinges.
J
Transfer cabinet plugs and cabinet
screws to opposite side of cabinet.
Remove cabinet plugs with flat .1_. t,,_.
blade screwdriver tip wrapped I_'i'_,--../."'---._-../L
in masking tape. ,_
Remove center mullion screws :r-t_q_.._ [_
with s/_" hex head driver.
_1_: I
For swing doors only , _.:,._ _ J
Remove bottom mullion screws _,_-_._ _._ I
with 3/e' hex head driver. _-_/'_ J
2
IMPORTANT: When working directly on doors, place doors
on a nonabrasive surface protected by towels or rugs to
avoid damage to door finish.
Transfer door stops from
bottom edge of fresh fooa
and freezer door to
opposite side of door edge. _ _'
Use a Phillips screwdriver for removal and
installation.
$ee
How to Install and Remove 1
Handles to remove and reinstah
handles.
IjProceed to How to Replace the Doors and Hinges to mount
doors.
I
How to Install and Remove Handles
Installing Fresh Food Front-Mounted Handles
If installing handles for the firsttime, the fresh food handles can be
located within the flesh food section. The handle trimwill be located
in the literature pack. t
I1 Remove _ "hex nut screws from
door face with hex nut driver.
• If reversing door, remove door plugs |
from opposite side of door and insert,=t _
in screw holes.
,") handleholes w ithscrewbo [JI 1
_.t on door face and secure with _
door face screws from step 1. _
Locate handle trim in literature
pack and install over top ana
bottom of handle, as illustrated.
Secure top handle trim with remaining
screw removed in step 1.
Snap bottom trim over bottom portion of
handle.
i
Removing Fresh Food Front-Mounted Handles
Removing handles may be necessary when transportingunit through
tight spaces, or when reversing the door.
1
Remove top handle trim b7
removing top handle screw.
Retain trimand screwfor later
replacement.
PrY bottom handle ttfm from
handle with screwdriver tIat blade
wrapped in masMng tape.
Retain trimfor later replacement.
Remove two remaining handle
screws and remove handle.
• Retain screws for later replacement.
Installing Freezer Handles
If installing handles for the first time, the freezer handles can be
located within the freezer section, i J
f Inst'!handle b,fasten'og with L= 'l
I screws removed from edge ol roll
I door. iII
/
"
If reversing freezer door, remove door plugs from 1
_, top edge of door and insert into screw holes. ,)
5
Removing Freezer Handles
Removing handles may be necessary when transporting unit through
tight spaces, or when reversing the door.
Remove handle screws with
Phillipsscrewdziver. _l
• Retain screws for later replacement. _J