Ram Disk; Setting Ram Disk; Administrator Settings; General - Kyocera ECOSYS FS-C5150DN User Manual

RAM Disk

Setting RAM Disk

1
2
3

Administrator Settings

General

Show Quick Print Tab

Printer Driver
The RAM disk functions as a virtual hard disk, saving print requests into the
printing system's memory. Because the RAM disk is temporary memory, all data
stored there is lost when the power is turned off.
Note: When a hard disk is installed, the RAM disk feature is inactive.
In a client/server environment, this feature is unavailable to a client logged in as
a restricted user.
If selected, the Ignore application collation feature in the Compatibility
Settings dialog box lets the driver control collation. RAM disk can then increase
the print speed of collated multiple copies by sending the print job just once.
You can set the RAM disk to save print requests into the printing system's
memory.
At the printing system's operation panel, turn on RAM disk and set its size.
In Device Settings > Device options, select RAM disk.
In the RAM disk text box, type or select the desired RAM disk size. Click the up
and down arrows until the text box shows the correct number of megabytes
(MB) available physically on the operation panel.
The maximum RAM disk size depends on the amount of installed memory.
Administrator Settings lets you set options that include controlling
accessibility, displaying features in the interface and setting a password to
control access to the Administrator Settings options. Selections vary
according to printing system model.
In a client/server environment, this feature is unavailable to a client logged in as
a restricted user.
An administrator can control the display of the Quick Print tab, and other
miscellaneous settings, including password and SNMP settings.
This option lets you control the display of the Quick Print tab. You can define
basic print options into group profiles for improved accessibility.
With a cleared check box for Show Quick Print tab, the tab does not appear in
the Printing Preferences dialog box.
To enable this feature, in Device Settings > Administrator Settings >
General, select Show Quick Print tab.
With a selected check box for the Show Quick Print tab, the tab appears in the
Printing Preferences dialog box. When you select the Show Quick Print tab
check box, you can access additional check boxes:
Device Settings
2-4