Editing A Prologue/Epilogue File; Deleting A Prologue/Epilogue File; Assigning A Prologue/Epilogue File; Unassigning A Prologue/Epilogue File - Kyocera ECOSYS FS-C5150DN User Manual

Advanced

Editing a Prologue/Epilogue File

1
2
3

Deleting a Prologue/Epilogue File

1
2

Assigning a Prologue/Epilogue File

1
2

Unassigning a Prologue/Epilogue File

1
2

Specifying the Insertion Point

9-2
You can edit a Prologue/Epilogue file on your computer.
In Advanced > Prologue/Epilogue, select a Prologue/Epilogue file name
from the list, and then click Edit.
After your text editor opens, make your changes to the file.
Save the file and exit.
Note: Editing and saving a command file replaces the contents of the existing
local or network file.
You can remove a Prologue/Epilogue file from the list.
In Advanced > Prologue/Epilogue, select a Prologue/Epilogue file name
from the list, and then click Delete.
In the delete confirmation box, click Yes to accept.
Note: Only the file name is removed from the command file list. The file itself
is not deleted, but remains on the network or local computer.
You can insert a Prologue/Epilogue file into a print job.
In Advanced > Prologue/Epilogue, select a Prologue/Epilogue file name
from the list.
Under Insertion Point, select a place to insert the Prologue/Epilogue file.
If you designate a Prologue/Epilogue file as unassigned, you are removing it
from the print job. It remains in the list. Unassigned selections are useful when
the list contains several Prologue/Epilogue files, and you want to use some but
not others.
In Advanced > Prologue/Epilogue, select a Prologue/Epilogue file name
from the list.
Under Insertion Point, select Unassigned.
The insertion point is the location in the print job where the selected
Prologue/Epilogue command file is processed by the printing system. Each file
in the list can be assigned only one insertion point.
User Guide