Oki B6100 Technical Manual page 48

Primary FIPs:Error Codes
3.12 E2-1:MISFEED JAM continued
Step
3
Is there a sheet of paper before the Actuator Regi when
the E2-1 code appears?
4
PAPER SIZE ANALYSIS
1. Check the size of paper currently loaded.
2. A paper jam can occur if the paper used is larger or smaller
than the maximum or minimum size specified for this printer.
Does the paper size meet specifications?
5
GEAR ASSY DRIVE (PL8.1.13) ANALYSIS
1. Use MAIN MOTOR TEST to check the Gear Assy Drive
function.
2. Open the Cover Assy Front (PL1.1.9).
3. Remove the CRU (PL8.1.1).
4. Actuate the Switch Assy I/L Front (PL10.1.12).
Do the transmission gears rotate correctly against those
of the Roll Assy Turn (PL3.1.1), the Feeder Assy
(PL3.1.19), Clutch Regi (PL5.1.19)?
6
PLATE ASSY BOTTOM (PL2.1.2) ANALYSIS
Inspect the Plate Assy Bottom to be lifted up smoothly by man-
ual.
Is the Plate Assy Bottom lifted up smoothly?
7
MOTOR ASSY (PL2.2.22) ANALYSIS
1. Pull out the Cassette Assy and remove the loaded paper
remaining minimum sheets that does not actuate the Actua-
tor N/P (PL3.1.6).
2. Reinstall the Cassette Assy and execute test print.
Is the Plate Assy Bottom lifted up by the Motor Assy and a
sheet of paper fed normally?
3-28
Actions and Questions
OKI B6100 Laser Printer - Base Engine Technical Manual
Yes No
Remove the Go to step 4.
jammed
paper.
Go to step 5. Load paper
that meets
specifications.
Go to step 6. Replace the
Gear Assy
Drive
(RRP8.1.3).
Go to step 9. Go to step 7.
Go to step 9. Go to step 8.
Version 1.0