Using Wave Files For The Multi Pads - Yamaha PSR-S950 Owner's Manual

Using WAVE Files for the Multi Pads

You can use WAVE files, created via the USB Audio function (page 67) or
commercially-available ones for the Multi Pad playback. To do this, you need to
create an Audio Link Multi Pad by linking the WAVE files to each of the Multi Pads.
Creating an Audio Link Multi Pad
1
Prepare the WAVE files in the USB flash memory.
2
Connect the USB flash memory to the [USB TO DEVICE]
terminal.
3
Press the MULTI PAD CONTROL [SELECT] button to call up the
Multi Pad Bank Selection display.
4
Press the [7 ] (AUDIO LINK) button to call up the Multi Pad
Audio Link display.
5
Select the desired Pad by pressing any of the [A], [B], [F] and
[G] buttons.
The WAVE display appears.
6
Select the desired WAVE file by using the [A] – [J] buttons.
To confirm the information of the selected WAVE file:
Press the [7 ] (INFO.) button to call up the information window. You can
confirm the information (file name, title name, time and sample rate, etc.). Press
the [F] (OK) button to close it.
7
Press the [EXIT] button to return to the Multi Pad Audio Link
display.
NEXT PAGE
NOTE
Audio Link Multi Pads are neither cre-
ated nor played back during playback,
recording standby or recording of
audio files. For details on the audio
files, see page 64.
NOTE
You will need to press the [C] (NEW
BANK) button in the Multi Pad Audio
Link display to create an Audio Pad, if
an Audio Link Multi Pad has been
selected when you pressed the [7 ]
(AUDIO LINK) button. Otherwise, you
are simply re-selecting the link in the
selected Audio Link Multi Pad.
NOTE
A WAVE file cannot be linked to a MIDI
Multi Pad.
PSR-S950/S750 Owner's Manual
5
5
71