Using The Wheels; Applying Voice Effects - Yamaha PSR-S950 Owner's Manual

Using the Wheels

Using the Pitch Bend Wheel
Use the PITCH BEND wheel to bend notes up (roll the wheel away from you) or
down (roll the wheel toward you) while playing the keyboard. The Pitch Bend is
applied to all the keyboard parts (RIGHT 1, 2 and LEFT). The PITCH BEND wheel
is self-centering and will automatically return to normal pitch when released.
The maximum pitch bend range can be changed on the Mixing Console display:
[MIXING CONSOLE]  TAB [E][F] TUNE  [H] PITCH BEND RANGE.
Using the Modulation Wheel
The Modulation function applies a vibrato effect to notes played on the keyboard. By
default, this is applied to the keyboard parts (RIGHT 1, 2 and LEFT). Moving the
MODULATION wheel down (toward you) decreases the depth of the effect, while
moving it up (away from you) increases it.
You can set whether the effects caused by the MODULATION Wheel will be
applied or not to each of the keyboard part: [FUNCTION]  [D] CONTROLLER
 TAB [E][F] KEYBOARD/PANEL  [A]/[B] 2 MODULATION WHEEL.

Applying Voice Effects

You can apply some effects to the keyboard performance. The effects can be turned on or off by using the following
buttons.
• HARMONY/ECHO
The Harmony/Echo effects are applied to the right-hand Voices. Refer to "Applying
Harmony to Your Right-hand Melody" on page 40.
These three effect systems are applied
to the currently selected keyboard part
(RIGHT 1, 2, or LEFT).
PSR-S950/S750 Owner's Manual
NOTE
The effects caused by using the PITCH
BEND Wheel are not applied to the
rhythm parts of the Style.
NOTE
Depending on the selected Voice, the
MODULATION wheel effect is not
applied to the rhythm parts of the
Style.
NOTE
To avoid accidentally applying modu-
lation, make sure the MODULATION
Wheel is set at minimum (down) posi-
tion before you start playing.
NOTE
The effects caused by using the MOD-
ULATION wheel may not be applied to
the LEFT part during Style playback
depending on the Style setting.
39
1