Playing Two Voices Simultaneously - Yamaha PSR-S950 Owner's Manual

4
Press one of the [A] – [J] buttons to select the desired Voice.
To call up the other display pages, press one of the [1 ] – [5 ] buttons or
press the same VOICE button again.
To listen to the demo phrases for each Voice
Press the [8 ] (DEMO) button to start the Demo for the selected Voice. To stop the demo, press the [8 ]
button again.
5
Play the keyboard.
Recalling your favorite Voices easily
The sheer number of Voices may seem overwhelming at first. By copying your favorite Preset Voices to the
USER drive, you can quickly and easily recall them as needed.
1. Copy your favorite Voice from the Preset drive to the User drive. Refer to page 28 for details on the copy oper-
ation.
2. Press the [EXPANSION/USER] button to call up the User drive of the Voice Selection display, then press one
of the [A] – [J] buttons to select the desired Voice.

Playing Two Voices Simultaneously

1
Select a Voice for the Right 1 part (page 32).
2
Press the PART SELECT [RIGHT 2] button.
3
Press the PART ON/OFF [RIGHT 2] button to turn on the Right 2
part.
NEXT PAGE
3
PSR-S950/S750 Owner's Manual
NOTE
If you pressed the [ORGAN FLUTES]
button in step 2, press the [I] (PRE-
SET) button before proceeding to step
3.
NOTE
The Voice type and its defining charac-
teristics are indicated above the Preset
Voice name. For details on the charac-
teristics, refer to the Reference Manual
on the website.
NOTE
You can call up the information for the
selected Voice by pressing the [7 ]
(INFO.) button. (Some Voices do not
have an information display.) To close
the information display, press the
[EXIT] button.
33
1