Craftsman 247.29922 Operator's Manual page 9

4. Tightenthe boltsecurelyafter securingthe handlebrace.See
Figure4.
5. Locatethecarriagebolt, bell washerand hand knobpackedwith
yourtiller.
6. Insertthe carriagebolt throughthe weldedbracketon the handle,
bell washer,handlebraceand intothe hand knob.See Figure4.
7. Selectone of the threehandleheightpositions(threenotchesin
the weldedhandlebracket)and tightenthe hand knobto secure
the handlein the desiredposition.See Figure4. Returnto the
lowerhandleand tightenthe hexbolt securely.
ATTACHING THE DEPTH GAGE
1. Disassemblethedepthgage assembly.See Figure5. Retainthe
pin and clip for laterreassembly.
2. Removethetwo screwsfrom the tail bracket.See Figure6.
3. Insertthe depthgage bracketintothe frameand reinstallthe
two screwsremovedearlier.Tightenthe hexbolts securely.See
Figure6.
4. Insertthe depthstakeintothe depthgage bracketassembly.See
Figure7.
5. Securethe pin with the clip removedearlier.Thedepth stakecan
be placedat variouspositions.Forsetuppurposesit is suggested
that the depthstakebe assembledwith the stakejust above
or levelwith the groundsurface.Forfurther instructionson the
DepthStake referto the OperationSectionof this manual.
Hand Knob
f
Tail Bracket
Pin
Depth
Stake
Figure5
.................. /,
Tail Bracket
.....................
Figure6
(:otter
Pin
_Clevis Pin
9
Figure7
J