Replacing Consumables; Inserting The Battery - Epson EMP-52 User Manual

Maintenance

Replacing Consumables

This section describes how to replace the remote control battery, the lamp and
the air filter.

Inserting the Battery

Use the following type of battery as a replacement.
1 CR2025 lithium battery
Caution :
Be sure to read the Safety Instructions/World-Wide Warranty Terms before handling the
battery.
Procedure
1 Remove the battery holder.
While pushing the catch of the battery
holder inwards, pull the battery holder out.
2
Remove the old battery and insert
the new battery.
Check the position of the (+) mark inside
the battery holder to ensure that that
battery is inserted the correct way.
3
Insert the battery holder into the
remote control.
Push the battery holder in until it clicks.
Tip :
Dispose of used batteries in accordance with local
waste disposal regulations.
Catch
Old battery
74
New
battery
mark