Adjusting The Image Quality; Focusing The Screen Image; Adjusting Computer Images; Automatic Setup - Epson EMP-52 User Manual

Adjusting the Image Quality

The quality of the screen images can be adjusted as follows.

Focusing the Screen Image

Procedure
Turn the focus ring to adjust the image
focus.
Turn the focus ring of the projector until the
projected images are in proper focus.
Tip :
• If the surface of the lens is dirty or misted over as a result of condensation, it may not
be possible to adjust the focus correctly. If this happens, clean or de-mist the lens.
(p.66, 72)
• If the projector is positioned outside the normal projecting range of 0.9–11.3 m (2.9–
37.0 ft.), it may not be possible to obtain the correct focus. If you have trouble
obtaining the correct focus, check the projection distance.

Adjusting Computer Images

Automatic Setup

Automatic setup detects the status of the signals coming from the connected
computer, and automatically adjusts these signals so that the optimum images
can be obtained. It involves adjustment of the following three items:
Tracking , Position and Sync .
Tip :
• If "Auto Setup" in the "Video" menu is set to "OFF" (the default setting for this item is
"ON"), automatic setup is not carried out. If you press the [Auto] button on the remote
control while computer signals are being projected, adjustment will then be carried
out.
Auto
Remote control
Enter
ESC
37
Focus ring