GE JGB900 Owner's Manual & Installation Instructions page 31

ge.com
The oven door must be closed and all controls set correctly for the cycle to work properly.
®
QOQQQ
QQQCZ)
00QQ
QQQ(Z)ZD
How to Delay the Start of Cleaning
Make sure the clock shows the correct time
of day.
[] Touch the SELFCLEAN pad.
[] Using the number pads, enter the
desired clean time.
[] Touch the DELAYSTART
pad.
The
earliest start time wm can set will
appear in the display.
[] Using the number pads, enter the
time of day "_otl want the clean cxcle
to start.
[] Touch
the START pad.
The door locks automatically. The display
will show the start time. It will not be
possible to open the oven door tmtil
the temperature drops below the lock
temperature and the LOCKEDDOOR
light goes ofl_
_]_en the LOCKEDDOOR light is off, open
the doo_:
After a Clean Cycle
Y_m may notice some white ash in the oxen.
X_qI)e it up with a damp cloth alter the
oxen cools.
If white spotsremain, r emove themwith a soap-
filiedscouring padandrinsethoroughly w ith a
whegar a ndwatermlkture.
These deposits are usuall) a salt residue
that cannot be remoxed b_ the clean cxcle.
If the oven is not clean after one clean
c_cle repeat the c_cle.
iJi:: Y ))u cannot set the oven fi)r cooking tmtil
the oven is cool enough for the door to
tmlock.
_: X41file the oven is sel6cleaning, you can
touch the CLOCKpad to display the
time of day: To return to the clean
cotmtdown, touch the COOKING TIME
pad.
::Ji:: If the shelves become hard to slide, apply
a small amount _ffvegetable oil or cooking
oil to a paper u_wel and wipe the edges of
the oven shelves with the paper towel.
3/
I
!iiiii_;diiiiiiii
=:
g
g
}