Emotiva Mps-1 Modular Power Amplifier; Modular Professional Power Amplifier Features - Emotiva MPS-1 User Manual

Emotiva MPS-1 Modular Power Amplifier

Modular Professional Power Amplifier Features

• Audiophile quality, modular power amplifier
• True card cage design can accommodate up to seven independent 200 watt mono block power modules
- power modules glide in and out on Nylon rails
• Power modules feature independent 350VA, low noise toroid power transformers w/ high speed rectifiers
and 48,000uF of storage per channel for a 336,000uF total, across seven independent channels
• High efficiency Class H power amplifier design, minimizes power losses and allows cool and efficient
operation
• Complementary, discrete power amplifier design incorporating high current, high speed, Toshiba power
devices
• 200 Watts x 7 into 8 Ohms (using seven EPM-300 Power Modules)
• 300 Watts x 7 into 4 Ohms (using seven EPM-300 Power Modules)
• 400 Watts x 7 into 2 Ohms (using seven EPM-300 Power Modules)
• Power modules are completely stable into 2 ohm loads
• Truly transparent, integrated soft clip circuitry
• Balanced XLR and RCA inputs
• Silent turn on/off - No audible transients
• THD less than .015%, 20Hz-20kHz with 80kHz measurement bandwidth
• DC offset, less than 1mv, servo controlled.
• Crosstalk between ANY channels – greater than 120dB
• All aluminum capacitors are premium quality, low ESR, 105°C rated for high reliability and perfor-
mance
• Doubled sided, plate through, glass epoxy, FR4 PCB's used throughout with 2 ounce poured copper on
all power sections and ground planes
• Individual channel status indicators for standby, operate, and fault behind tinted acrylic panel
• Fully protected from all fault conditions with ultra quiet, module mounted, fan assisted cooling for
severe duty cycle applications
• Soft start circuitry
• Signal sensing auto turn-on or remote 12 VDC trigger. Soft touch power switch
• Modules are designed for field replacement with the removal of four screws
• Black lacquered, piano finished wood side panels are included, as are milled aluminum rack ears for
professional installations
• Massive, multi element milled aluminum faceplate with "floating" wing detail – indirect, cobalt blue
panel illumination with panel dimmer
• IEC power inlet, 120/230 VAC user configurable
Page 11