Safety Precautions - Emotiva MPS-1 User Manual

Professional multi-channel av amplifier
Table of Contents

Advertisement

Safety Precautions

Read this Owner's Guide thoroughly before attempting to install and configure the Emotiva MPS-1
Modular Power Amplifier. All the safety and operation instructions should be read before any op-
eration of the component(s) begin. After successful installation and configuration of the Emotiva
MPS-1 Modular Power Amplifier, be sure to retain this manual in a safe place for any future reference
needs.
All warnings on the Emotiva MPS-1 Amplifier and in these operating instructions should be followed.
Safety is a key component to a long lasting and trouble free installation. The vast majority of the
subsequent safety precautions involve simple common sense. If you are not comfortable with the
installation of audio/video entertainment equipment, it will be to your benefit to seek the services
of a qualified installation professional.
• The Emotiva MPS-1 Amplifier should NEVER be used near water such as a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming pool, etc.
• The Emotiva MPS-1 Amplifier should be situated so that its location or installation position does not
interfere with proper ventilation.
• The Emotiva MPS-1 Amplifier should not be situated on a bed, sofa, rug, or similar surface that may
block any ventilation openings; or placed in a built-in installation such as a bookcase, cabinet, or closed
equipment rack that may impede the flow of air through ventilation openings. If installed in a closed
equipment rack for custom installations, be sure to add forced air ventilation so that it has adequate
air circulation.
• The Emotiva MPS-1 Amplifier should be situated away from heat sources such as radiators, or any other
devices which produce heat.
• The Emotiva MPS-1 Amplifier should be connected to a power supply only of the type described in this
User's Guide and what is labeled on the MPS-1 component. Power supply cords should be routed so
that they are not in high foot traffic areas or pinched by items placed upon or against them, paying
particular attention to cords at the wall plugs, convenience receptacles, and the point where they con-
nect into the MPS-1 Amplifier. The power cord of the MPS-1 Amplifier should be unplugged from the
outlet when unused for a long period of time.
When it's time for cleaning the Emotiva MPS-1 Amplifier, it should be cleaned only as recommended
in this Owner's Guide. Never spray liquids directly into the component's vent openings. Care should
be taken so that small objects do not fall into the inside of the MPS-1 Amplifier.
The following situations require your Emotiva MPS-1 Amplifier is serviced only by qualified service
personnel:
1. The power-supply cord or the plug has been damaged; or
2. Objects have fallen, or liquid has spilled into the component; or
3. The MPS-1 has been exposed to rain; or
4. The MPS-1 does not appear to operate normally or exhibits a marked change in performance; or
5. The MPS-1 has been dropped, or its enclosure or chassis is damaged.
Page 6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents