Panasonic SC-BT300 Operating Instructions Manual page 11

Blu-ray disc home theater sound system
Hide thumbs Also See for SC-BT300:
Table of Contents

Advertisement

€)
Connections
with a component
video cable
Do not disconnect the video cable even if the below is connected. Some features
may not be displayed.
TV
Component
Video cable
(not included)
Audio cable .1
(not included)
The optical digital audio
cable can be used when
connecting to televisions
with optical out terminals
(_> right).
COMPONENT
VIDEO OUT }
m Optical digital
audio cable .1,2
(not included)
Main unit
1
._-'m
• Connect to terminals
of the same color:
l'_,.'_
• Set !tBlack Level Contror' to "Darker!!. (_ 37)
• Using the COMPONENT
VIDEO OUT terminal
while playing DVD-Video
the Video output resolution is limited to "480p".
NOTE
• Be sure y0ur-l-V supports at least 480p. Set "component
Video ResOlution '! to "480p" ,720p!' Or 'it080i':. (_ 39)
• Set t'High C!arity Sound'i in the 0n-screen menu to ttOfff (_ 36). (Otherwise, the video wi!l not be Output.)
To enjoy high definition/progressive
video
L'_'I
• Connect to a -lV that Supports 480p or higher_
• Set !'Component Video Resolution! _to '_480p!', "720p' or ! 1080i?: (_ 39)
S
• Set !!HDMI Video Mode!! to ,Off'. (_ 39)Otherwisel
the video is output as 480i:
Connections
with an HDMI cable
Do not disconnect the video cable even if the below is connected. Some features
may not be displayed.
coL%,e
HDMI cable
(not included)
Audio cable *_
(not included)
The optical digital audio
cable can be used when
connecting to televisions
with optical out terminals
(_> right).
Optical digital
audio cable *_,2
(not included)
i_
¸
Main unit
HDMI AV OUT
._
• Non-HOMI.c0mpliant
cables cannot be utilized,
{_]
ePlease
use High Speed H DMI Cables that have the BOil
logo (as shown on the cover). It is recommended
that You use
Panasonic!s
H DMI cable.
NOTE
Recommended
part number:
RP-CDHG10
(1.0 m/313 ft), RP-CDHG!5
(1.5 m/4,9 ft), RP_CDHG20 (2.0 m!6. 6 ft)RP:CDHG30
(3,0 m/9_8 ft),
RP,CDHG50
(5.0 m/16.4 ft), etc:
TM
This unit incorporates
HDMI (Deep C01or, X.v.C01or , High Bit rate Audio)technology.
(_54,
55)
eWhen outputting 1080p signal (039,
!'HDM! Resolution'i),
please use HDM! cables 5,0 m (!6 4 ft) 0r !ess.
NECESSARY
SETTINGS
tlHDMI Vide0 Mode!! i IlOn!:!!!HDMI Audio OutPuti: ; 'ioff'i (_39)
TIPS
With this c0nnecti0n,
you can use
_
To enjoy TV audio from this home theater
System's
Speakers
[
,i
You Can enjoy the audi0 from your TV thr0Ugh this home theater system's Speakers by Connecting to the '!AUX(TV)" term nal or
_
"OPTICAL 1('l-V)'! terminal, (_ 27)
2 -l-h s s the preferred connect on for best s0und and true surround sound,
This unit can decode the surround signals received from your TV. Refer to the operating instructions for the -I-V for the settings
necessary to output its audio from the digital audio output to your home theater system On y Do!by Digital and pCM canbe played
with this connectionl
-After making this connection, make settings to suit the type of audio from your digital equipment (_ 27).
RQT9371

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sc-bt200

Table of Contents