Kenmore 625.383000 Use & Care Manual page 4

Model No. 625.383000
Model Code 300
8,300 @ 1.7 Ibs.
Rated Softening Capacity (Grains @ Salt Dose) 20,400 @ 6.5 Ibs.
24,400 @ 11.0 Ibs.
Rated Efficiency (Grains/Pound of Salt @ Minimum Salt Dose) 4,880 @ 1.7 Ibs.
Rated Service Flow Rate Z3 gpm
Amount of High Capacity Ion Exchange Resin 0.68 cu. ft.
Pressure Drop at Rated Service Flow 15 psig
Water Supply Max. Hardness 70 gpg
Water Supply Max. Clear Water Iron 5 ppm*
Water Pressure Limits (minimum / maximum) 20 - 125 psi
Water Temperature Limits (minimum / maximum) 40 - 120 °F
Minimum Water Supply Flow Rate 3 gpm
Maximum Drain Flow Rate 0.9 gpm
*Capacity to reduce clear water iron is substantiated by WQA test data. State of Wisconsin
requires additional treatment if water supply contains clear water iron exceeding 5 ppm.
These systems conform to NSF/ANSI 44 for the specific performance claims as verified and
substantiated by test data.
The efficiency rating is only valid at the stated salt dose. These softeners were efficiency
rated according to NSF/ANSI Standard 44.
Variable Salt Dose: The salt dose is selected by the electronic controls at regeneration time
based on the amount needed.
_ 16-1/2" _
3-3/8" 1 _ 19-3/4" _
40-1/4"
IN - OUT
I
FRONT VIEW SIDE VIEW
Figure 1
4
Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www.kenmorewater.com