Overview; Before Installing The Fax Driver (For The Administrator); Preparation Flow - Konica Minolta bizhub C654 User Manual

2.1

Overview

2 Preparation for PC-Fax TX (via network connec-
tion)
2.1 Overview
Before using the PC-Fax TX function, you must install the fax driver software on your PC.
This section explains the preparatory procedure for enabling the PC-Fax TX function using the installer sup-
plied with this machine.
2.2

Before installing the fax driver (for the administrator)

Preparation flow

Before installing the printer driver software on the PC, you must first set up this machine to enable PC-Fax
TX via the network connection.
1
Connect this machine to the network.
% Check the LAN cable for connection.
% Check the network settings.
Ensure that this machine has an IP address assigned to it.
2
Set up the PC-Fax operating environment.
% When using the Normal printing (at port 9100)
Make sure that the RAW port number has been set. (Usually, you can use the default settings.) Use Nor-
mal Printing (Port 9100) unless otherwise specified by the administrator.
% When using the Internet Print (IPP)
Check the IPP operating environment. (Usually, you can use the default settings.)
% When using the Secure Print (IPPS)
Set up the IPPS operating environment. Establish the communication with SSL encryption between this
machine and the PC.
3
Preparation has finished.
bizhub C754/C654
2
2-2