Folding; Specifying The Output Tray - Konica Minolta bizhub C550 User Manual

Setting up the PCL driver (Windows)

Folding

You can specify to fold a printed document.
Reminder
The Half-fold function and Tri-fold function are available only when op-
tional finisher FS-608 is installed.
The Z-fold function is available only when the Z folding unit is installed
with the optional finisher.
1
Click the Finish tab.
2
Select the "Fold" check box.
3
From the drop-down list, specify the folding condition.
Note
The Half-fold function or Tri-fold function cannot be specified when the
staple, punch, or Center Staple and Fold function is specified.
The Z-fold function cannot be specified when the Center Staple and Fold
function is specified.
To use the Z-fold function, set the "Paper Size" setting of the application
software or printer driver to the paper size value indicated in the setting
(Z-Fold (A3, B4, 11 × 17, 8K)/Z-Fold (8-1/2 × 14)) that is selected from the
drop-down list.

Specifying the output tray

You can specify the tray to which the printed document is output.
1
Click the Finish tab.
2
From the "Output Tray" drop-down list, specify the output tray.
C550
5
5-19