Specifying Display Settings For The User List - Konica Minolta bizhub C451 User Manual

Authentication Manager
Function
User Name
User Group Name
Description
External Server Name
Account Name
E-mail Address
Home
Maximum Number of Box
Apply Level
Biometric Unit No.
3.1.3

Specifying display settings for the user list

The items to be displayed or hidden in the user list can be selected. Settings
can be specified for the following parameters.
- User Name
- User Group Name
- Description
Authentication Manager
Description
The user is deleted via an external server.
Displays the user name.
Displays the name of the group to belong to.
Displays the description of the user.
Displays the name of the registered external server.
Displays the account track information of the user. If you do
not synchronize the user and account when managing the
account, "Do Not Synchronize" is displayed. When you
synchronize them, the account name is displayed if the
name of the account that the user belongs to is specified.
"None" is displayed if no account name is specified.
Displays the e-mail address of the user.
Displays the address of the SMB server that is normally
used by the user.
Reminder
To use "Home" (send the scanned data to the
Home address) for the device, the following
conditions must be satisfied.
- The device supports the use of "Home".
- Active Directory is used to perform authenti-
cation of the external server.
If other than Active Directory is used for authen-
tication, "Home" cannot be used for the device.
Displays the upper limit on the number of boxes that the
user can create. The upper limit of the user with this item
blank is not managed.
Displays the access permission level for the address book.
Displays the biometric unit No.
Reminder
This page is displayed when the license for
Gateway for Biometric Authentication Manager
is registered.
3
3-3