Send A Fax With Program Destination; Sending A Fax After Specifying Program Destination - Konica Minolta bizhub C451 User Manual

Transmission
2.8

Send a fax with Program destination

When the program destination is registered, a fax can be sent by specifying
the registered program button.
If transmission settings (Original type and original specification etc.) are reg-
istered by a program button, a fax can be sent only by touching that button
without specifying function settings at each time.
The transmission is possible once after registering group button in 1 program
button.

Sending a fax after specifying program destination

1
Press [Fax/Scan] key to display the Fax/Scan screen.
2
Load the original.
– Refer to "Loading the original" on page 2-12 for details on position-
ing the original.
3
Press [Mode Memory]
key.
C451
2
2-38