Asus P8H67 User Manual page 38

2. Intel H67 Serial ATA 3.0Gb/s connectors (7-pin SATA3G_1~4 [blue])
®
These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical drives via
Serial ATA 3.0 Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 0+1(10)
configurations with the Intel
chipset.
P8H67 Intel
• These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA
• Before creating a RAID set, refer to the RAID Supplementary Guide included in the
• You must install Windows
• When using hot-plug and NCQ, set the SATA Mode item in the BIOS to [AHCI Mode].
1-26
Rapid Storage Technology through the onboard Intel
®
P8H67
SATA 3.0Gb/s connectors
®
RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode].
See section 2.5.4 SATA Configuration for details.
folder named Manual in the support DVD.
hard disk drives. The Serial ATA RAID feature (RAID 0, 1, 5, and 10) is available only if
you are using Windows
See section 2.5.4 SATA Configuration for details.
SATA3G_3 SATA3G_1
GND GND
RSATA_RXN3 RSATA_TXP1
RSATA_RXP3 RSATA_TXN1
GND GND
RSATA_TXN3 RSATA_RXP1
RSATA_TXP3 RSATA_RXN1
GND GND
SATA3G_4 SATA3G_2
GND GND
RSATA_TXP2
RSATA_RXN4
RSATA_RXP4 RSATA_TXN2
GND GND
RSATA_TXN4 RSATA_RXP2
RSATA_TXP4 RSATA_RXN2
GND
GND
XP Service Pack 2 or later version before using Serial ATA
®
XP SP2 or later version.
®
Chapter 1: Product introduction
H67
®