Canon IR5000 - iR B/W Laser Driver Manual page 23

6
Do one of the following to establish communication with the printer:
If you know the IP Address/Network Address of the printer, click the Manual Address
Settings check box, and then enter the IP Address/Network Address of the printer.
If you do not know the IP Address/Network Address of the printer, click the Discover
button, and then select the printer from the list box displaying the detected device
names.
7
Click the OK button in the Select Device dialog box.
8
In the Configuration sheet (Windows 95/98) or Device Settings sheet (Windows NT4.0/
2000), click the Get Device Status button.
The detected information is displayed in the Device Settings sheet.
9
Click the OK button.
IMPORTANT
If you want to set up the printer configuration automatically, please note the following points.
• For imageRUNNER 6000/5000 and iR3250, it is necessary to install Canon NetSpot Suite Service. See
P2-6 for installing Canon NetSpot Suite Service.
• For imageRUNNER 600/550/60, imageRUNNER 400/330, imageRUNNER 210 and GP225/GP200, one
of the following environments is required:
- Novell NetWare IPX/SPX Client Software needs to be installed in your PC to use IPX/SPX as the
protocol.
- TCP/IP Protocol provided by Window should be installed in your PC to use TCP/IP as the protocol.
• For GP215/GP200 and GP55/GP30, it is necessary to install the NetWare Client files. For details, refer
to the readme file.
NOTE
• If you cannot set up the configuration automatically, specify the options manually in the Configuration
sheet (Windows 95/98) or Device Settings sheet (Windows NT4.0/2000).
• For GP215/GP200 and GP55/GP30 using under Windows 2000, setting up the configuration automati-
cally is not available.
2-12 Setting Up the Printer Configuration