Asus P6T DELUXE - Motherboard - ATX User Manual page 166

Creating a RAID 10 set (RAID 0+1)
To create a RAID 10 set:
From the utility main menu, select 1. Create RAID Volume and press
1.
<Enter>. The following screen appears.
Intel(R) Matrix Storage Manager option ROM v8.0.0.1027 ICH10R wRAID5
[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [Enter]-Select
2. Enter a name for the RAID 10 set and press <Enter>.
3. When the RAID Level item is highlighted, press the up/down arrow key to
select RAID 10 (RAID 0+1), and then press <Enter>.
4. When the Stripe Size item is highlighted, press the up/down arrow key to
select the stripe size for the RAID 10 array, and then press <Enter>. The
available stripe size values range from 4 KB to 64 KB. The default stripe size
is 64 KB.
We recommend a lower stripe size for server systems, and a higher stripe size
for multimedia computer systems used mainly for audio and video editing.
5. Enter the RAID volume capacity that you want and press <Enter>. The default
value indicates the maximum capacity allowed.
4-50
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Enter a unique volume name that has no special characters and is
[ CREATE VOLUME MENU ]
Volume10
RAID10(RAID0+1)
Select Disks
64KB
XXX GB
Create Volume
[ HELP ]
16 characters or less.
Chapter 4: Software support