Intel Matrix Storage Manager Option Rom Utility - Asus P6T DELUXE - Motherboard - ATX User Manual

Intel Matrix Storage Manager option ROM utility
®
The Intel ® Matrix Storage Manager Option ROM utility allows you to create RAID 0,
RAID 1, RAID 10 (RAID 0+1), and RAID 5 set(s) from Serial ATA hard disk drives
that are connected to the Serial ATA connectors supported by the Southbridge.
To enter the Intel
1. Install all the Serial ATA hard disk drives.
2. Turn on the system.
3. During POST, press <Ctrl+I> to display the utility main menu.
Intel(R) Matrix Storage Manager Option ROM v8.0.0.1027 ICH10R wRAID5
1. Create RAID Volume
2. Delete RAID Volume
RAID Volumes:
None defined.
Physical Disks:
Port Drive Model Serial # Size Type/Status(Vol ID)
0 XXXXXXXXXXX
1 XXXXXXXXXXX
2 XXXXXXXXXXX
3 XXXXXXXXXXX
[↑↓]-Select
The navigation keys at the bottom of the screen allow you to move through
the menus and select the menu options.
The RAID BIOS setup screens shown in this section are for reference only and
may not exactly match the items on your screen.
4-46
® Matrix Storage Manager option ROM utility:
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
[ DISK/VOLUME INFORMATION ]
XXXXXXXX
XXXXXXXX
XXXXXXXX
XXXXXXXX
[ESC]-Exit [ENTER]-Select Menu
[ MAIN MENU ]
3. Reset Disks to Non-RAID
4. Exit
XX.XXGB
XX.XXGB
XX.XXGB
XX.XXGB
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Chapter 4: Software support