Table of Contents
Advertisement
Creating a RAID 0 set (striped)
To create a RAID 0 set:
From the utility main menu, select 1. Create RAID Volume and press
1.
<Enter>. The following screen appears.
Intel(R) Matrix Storage Manager option ROM v8.0.0.1027 ICH10R wRAID5
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
Enter a unique volume name that has no special characters and is
[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [Enter]-Select
2.
Enter a name for the RAID 0 set and press <Enter>.
3.
When the RAID Level item is highlighted, press the up/down arrow key to
select RAID 0(Stripe), and then press <Enter>.
4.
When the Disks item is highlighted, press <Enter> to select the hard disk
drives to configure as RAID. The following screen appears.
Port Drive Model Serial # Size Status
0 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk
1 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk
2 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk
3 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk
Select 2 to 6 disks to use in creating the volume.
[↑↓]-Previous/Next [SPACE]-SelectsDisk [ENTER]-Done
5.
Use the up/down arrow key to highlight a drive, and then press <Space>
to select. A small triangle marks the selected drive. Press <Enter> after
completing your selection.
ASUS P6T Deluxe V2
[ CREATE VOLUME MENU ]
Name:
Volume0
RAID Level:
RAID0(Stripe)
Disks:
Select Disks
Strip Size:
128KB
Capacity:
XXX GB
Create Volume
[ HELP ]
16 characters or less.
[ SELECT DISKS ]
4-47
Hide quick links:
Advertisement
Table of Contents
