Onboard Device Configuration - Asus P6T - Motherboard - ATX User Manual

3.5.3

Onboard Device Configuration

Advanced
Onboard Devices Configuration
High Definition Audio
Front Panel Type
SPDIF Mode Setting
J-Micron eSATA/PATA Controller [Enabled]
Controller Mode
Realtek LAN
LAN Boot ROM
Onboard 1394 Controller
High Definition Audio [Enabled]
Allows you to enable or disable the High Definition Audio Controller.
Configuration options: [Enabled] [Disabled]
Front Panel Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy
AC'97 or high-definition audio depending on the audio standard that the front
panel audio module supports.
Configuration options: [AC97] [HD Audio]
SPDIF Mode Setting [SPDIF Output]
If you want to transfer digital audio signal using the HDMI port on your VGA
card, set this item to [HDMI Output]. If you want to transfer digital audio signal
using the onboard S/PDIF port, set this item to [SPDIF Output].
Configuration options: [HDMI Output] [SPDIF Output]
J-Micron eSATA/PATA Controller [Enabled]
Allows you to enable or disable the J-Micron eSATA/PATA controller.
Configuration options: [Enabled] [Disabled]
Controller Mode [IDE]
Allows you to select the J-Micron controller mode.
Configuration options: [IDE] [AHCI]
Realtek LAN [Enabled]
Allows you to enable or disable the onboard Realtek LAN.
Configuration options: [Enabled] [Disabled]
LAN Boot ROM [Disabled]
This item appears only when you enable the previous item.
Configuration options: [Disabled] [Enabled]
Onboard 1394 Controller [Enabled]
Allows you to enabled or disable the onboard IEEE 1394a controller.
Configuration options: [Enabled] [Disabled]
ASUS P6T
BIOS SETUP UTILITY
[Enabled]
[HD Audio]
[SPDIF Output]
[IDE]
[Enabled]
[Disabled]
[Enabled]
Options
Enabled
Disabled
3-29