Timer Program Extension - Emerson EWC1901 Owner's Manual

For every day recording : To
record a TV program at the same
time on the same channel every
day. (Example: Monday through
Sunday)
Press the STOP/L (down) but-
ton until "EVRY DAY" appears. Then, press the
F.FWD/B button.
For weekly recording : To record a TV program at
the same time on the same channel every week.
(Example: every Monday)
Press the STOP/L (down) button
until "EVRY" and your desired
day of the week appear together.
Then, press the F.FWD/B but-
ton.
5
Set beginning hour
Press the PLAY/K or STOP/L but-
ton until the desired hour appears.
(Example: " 7, PM" for 7:30PM)
Then, press the F.FWD/B button.
6
Set beginning minute
Press the PLAY/K or STOP/L but-
ton until the desired minute appears.
(Example: "30" for 7:30PM)
Then, press the F.FWD/B button.
7
Set end hour
Press the PLAY/K or STOP/L but-
ton until the desired hour appears.
(Example: "8, PM" for 8:50PM)
Then, press the F.FWD/B button.
8
Set end minute
Press the PLAY/K or STOP/L but-
ton until the desired minute appears.
(Example: "50" for 8:50PM)
Then, press the F.FWD/B button.
9
Set the tape speed
Press the PLAY/K or STOP/L but-
ton until the desired tape speed
appears. (Example: SP)
– TIMER PROGRAMMING –
10
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
Press the F.FWD/B or REW/s button. The program
- - -/- - - - - -:- - -:- - - -
B 61 EVRY DAY -:- - -:- - - -
is now completed.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
•
- - -/- - - - - -:- - -:- - - - To set another program, repeat steps [2] to [10].
•
Press the MENU button on the remote control to
return to original mode.
11
Press the POWER button to set automatic timer
recording. The TIMER REC indicator lights up.
•
You must turn off the TV/VCR to activate automat-
– TIMER PROGRAMMING –
ic timer recording.
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
If power is not turned off and you continue watch-
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B 61 EVRY MON -:- - -:- - - -
ing TV, "TIMER REC STANDBY" starts flashing
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - - on the TV screen 2 minutes before the programmed
- - -/- - - - - -:- - -:- - - -
start time.
– TIMER PROGRAMMING –

TIMER PROGRAM EXTENSION

CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
To shift the time schedule of an automatic timer
P
B 61 7/06 FRI 7:12 -:- - - -
M
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - - recording.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
1)Press the POWER button.
2)Repeat step [1] on page 21.
3)Press the RECORD button and select the desired
– TIMER PROGRAMMING –
program using the PLAY/K or STOP/L button.
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - - 4)Press the RECORD button again.
- - -/- - - - - -:- - -:- - - -
P
B 61 7/06 FRI 7:30 -:- - - -
M
- - -/- - - - - -:- - -:- - - - Each additional push will shift forward the
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
begin/end time for recording by 10 minutes. When
- - -/- - - - - -:- - -:- - - -
the recording is already in progress, each additional
push will shift forward the end time only. If you
– TIMER PROGRAMMING –
want to cancel while setting, press the
CH DATE BEGIN END
PAUSE/STILL button on the remote control. The
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
recording time returns to the original time.
P P
B 61 7/06 FRI 7:30 8:30 - -
M M
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
NOTE: When you shift forward the time schedule
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
during recording, the recording speed will automati-
cally be set to the SLP mode.
5)Press the F.FWD/B or REW/s button to exit the
– TIMER PROGRAMMING –
setting menu. Then press the MENU button on the
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
remote control to return to original mode.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
P P
B 61 7/06 FRI 7:30 8:50 - -
M M
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
TO CORRECT A PROGRAM
- - -/- - - - - -:- - -:- - - -
•
While setting a program; press the REW/s but-
ton to go back one step and enter the correct num-
– TIMER PROGRAMMING –
bers using the PLAY/K or STOP/L button.
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - - •
After setting a program;
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
P P
B 61 7/06 FRI 7:30 8:50 SP
M M
1)Press the POWER button.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
2)Repeat steps [1] - [2] on page 21.
- - -/- - - - - -:- - -:- - - -
3)Press the F.FWD/B button (or press the REW/s
4)Press the POWER button to set automatic timer
- 22 -
Finish setting the program
Set the timer
button to go back one step) until the part you
want to correct begins flashing, then make the
changes pressing the PLAY/K or STOP/L but-
ton.
recording.
EN
9I03