Table of Contents
Advertisement
PICTURE CONTROL
The unit's picture controls – BRIGHT, CON-
TRAST, COLOR, TINT and SHARPNESS – are
preset to factory specifications. Although they are
usually the best, you may need to make some further
adjustments for a more natural looking image.
NOTE:
•
When setting the Picture Control, the Game mode
will be cancelled.
Make sure ...
•
The unit power must be turned on.
1
Select "PICTURE CONTROL"
Hit [MENU] on the remote control.
Press [PLAY/K K ] or [STOP/L L ] to
point to "PICTURE CONTROL".
Then, hit [F.FWD/ B B ].
2
Select item you want to adjust
Press [PLAY/K K ] or [STOP/L L ]
until desired control is displayed.
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
3
Adjust the picture control
Press [REW/s s ] or [F.FWD/ B B ] to adjust to your
desired level within 5 seconds.
REW/s
BRIGHT
to decrease
brightness
CONTRAST
to decrease
contrast
COLOR
to pale
TINT
to purple
SHARPNESS
to soft
•
Even if there is a power failure of any kind, the
unit will retain its memory for this feature.
GAME MODE
This function enables you to decrease the TV screen
contrast and making it suitable for use with a video
game.
NOTE: This function CANNOT be set during
recording.
Hit [GAME] on the remote control.
"GAME" appears on the screen.
When you hit [GAME];
•
The unit comes on automatically
if it is off.
•
The unit will be in external input
mode automatically.
TO CANCEL THE GAME MODE
Press [GAME] or [CHANNEL K/L] on the remote
control.
This television has a degaussing circuit that will clear
up color errors on the TV screen that are caused by
any excess magnetism which happens to get too close
to the TV. This circuit is designed to operate once
when the set is first plugged in. If minor color errors
are seen in some locations on the screen, please
unplug the TV for approximately 30 minutes. When
the TV is plugged back in, the degaussing circuit will
operate once to clear them up. Repeat this procedure
– M E N U –
TIMER PROGRAMMING
any time the TV screen is accidentally magnetized or
B PICTURE CONTROL
SETTING CLOCK
when the TV is moved or relocated.
CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
The Wake Up Timer function turns on the unit
without using [POWER] after a desired period of
time.
NOTES:
•
Use the remote control for this procedure.
•
Clock must be set to the correct time before setting
BRIGHT
– P P P P P P P P P P P P P P C C P P P P P P P P P P P P P P +
the timer.
•
If you want to select [TAPE], you must insert a
cassette tape in the unit. The tape will start
playback automatically on your desired time.
1
Hit [WAKE-UP/SLEEP] once, and
confirm "ON/OFF" is pointed.
Press [REW/s s ] or [F.FWD/ B B ]
F.FWD/ B
until "ON" appears.
to increase
brightness
to increase
2
contrast
Press [PLAY/K K ] or [STOP/L L ]
to brilliant
until to point to "TV/TAPE".
to green
Press [REW/s s ] or [F.FWD/ B B ],
to clear
and select [TV] or [TAPE].
3
Press [PLAY/K K ] or [STOP/L L ] until
to point to "TIME".
Press [REW/s s ] or [F.FWD/ B B ]
until your desired wake up time
appears.
Each additional press will increase
(or decrease) the time by 10
minutes.
GAME
4
Hit [MENU] to return to TV mode.
TO CANCEL THE WAKE UP TIMER
Select [OFF] at step 1.
- 11 -
DEGAUSSING
WAKE UP TIMER
Call up "WAKE-UP TIMER" setting
Select "TV" or "TAPE"
Set wake up time
Exit the Wake Up Timer setting
WAKE UP B ON/OFF
[ON]
TIMER
TV/TAPE
[TV]
TIME
[12:00AM]
WAKE UP
ON/OFF
[ON]
TIMER
B TV/TAPE
[TV]
TIME
[12:00AM]
WAKE UP
ON/OFF
[ON]
TIMER
TV/TAPE
[TV]
B TIME
[12:00AM]
EN
Hide quick links:
Advertisement
Table of Contents
