5
Set beginning hour
Press the Arrow button K or L
until the desired hour appears.
(Example: " 7, PM" for 7:30PM)
Then press the Arrow button B.
6
Set beginning minute
Press the Arrow button K or L
until the desired minute appears.
(Example: "30" for 7:30PM)
Then press the Arrow button B.
7
Set end hour
Press the Arrow button K or L
until the desired hour appears.
(Example: "8, PM" for 8:50PM)
Then press the Arrow button B.
8
Set end minute
Press the Arrow button K or L
until the desired minute appears.
(Example: "50" for 8:50PM)
Then press the Arrow button B.
9
Set the tape speed
Press the Arrow button K or L
until the desired tape speed
appears. (Example: SP)
10
Finish setting the program
Press the ENTER or RETURN button. The program
is now completed.
•
To set another program, repeat steps [2] to [10].
•
Press the SETUP button on the remote control to
return to original mode.
11
Set the timer
Press the POWER button to set automatic timer
recording. The Recording indicator illuminates.
•
You must turn off the unit to activate automatic
timer recording.
If power is not turned off and you continue watch-
ing TV, "TIMER REC STANDBY" starts flashing
on the TV screen for 2 minutes before the pro-
grammed start time.
TIMER PROGRAM EXTENSION
– TIMER PROGRAMMING –
CH DATE
BEGIN END
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
P
B 61 7/04 SUN 7:12
-:- - - -
M
To shift the time schedule of an automatic timer
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
recording.
- -
-/- - - - -
-:- -
-:- - - -
1)Press the POWER button.
2)Repeat step [1] on page 32.
– TIMER PROGRAMMING –
CH DATE
BEGIN END
3)Press the RECORD button and select the desired
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
program using the Arrow button K or L.
- -
-/- - - - -
-:- -
-:- - - -
P
B 61 7/04 SUN
7:30
-:- - - -
M
- -
-/- - - - -
-:- -
-:- - - -
4)Press the RECORD button again.
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
Each additional push will shift forward the
begin/end time for recording by 10 minutes. When
the recording is already in progress, each additional
– TIMER PROGRAMMING –
push will shift forward the end time only. If you
CH DATE
BEGIN END
want to cancel while setting, press the PAUSE but-
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
ton on the remote control. The recording time
P
P
B 61 7/04 SUN 7:30
8:30
- -
M
M
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
returns to the original time.
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
NOTE: When you shift forward the time schedule
during recording, the recording speed will automati-
cally be set to the SLP mode.
– TIMER PROGRAMMING –
CH DATE
BEGIN END
5)Press the ENTER or RETURN button to exit the
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
setting menu. Then press the SETUP button on the
- -
-/- - - - -
-:- -
-:- - - -
P
P
B 61 7/04 SUN 7:30
8:50
- -
M
M
- -
-/- - - - -
-:- -
-:- - - -
remote control to return to original mode.
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
TO CORRECT A PROGRAM
•
While setting a program; press the Arrow button
– TIMER PROGRAMMING –
s to go back one step and enter the correct num-
CH DATE
BEGIN END
- -
-/- - - - -
-:- -
-:- - - -
bers using the Arrow button K or L.
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
P
P
B 61 7/04 SUN 7:30
8:50
SP
•
M
M
After setting a program;
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
1)Press the POWER button.
- -
-/- - - - -
-:- -
-:- - - -
2)Repeat steps [1] to [2] on page 32.
3)Press the Arrow button B (or press the Arrow
4)Press the POWER button to set automatic timer
TO CANCEL AN AUTOMATIC TIMER
RECORDING
•
After setting a program;
1)Press the POWER button.
2)Repeat steps [1] to [2] on page 32 and select a
3)Press the C.RESET button.
4)Press the SETUP button on the remote control to
•
While recording is in progress;
1)Press the POWER button.
2)Press the STOP/EJECT button on the unit.
- 33 -
button s to go back one step) until the part you
want to correct begins flashing, then make the
changes pressing the Arrow button K or L.
recording.
program you want to cancel.
return to TV mode.
TV/VCR
EN
1C29